Space/ground-borne techniques and petrographic microscopic dissection for geologic mapping in Gabal Ras Abda area, Northeastern Desert, Egypt

Background Gabal Ras Abda area as a part of the Red Sea Mountain range, is characterized by inaccessible and rug-ged terrains. The exposed rock units are hardly followed in the field because of the rigid topography. Thus, the present work proposes and develops an integrated approach to map the exposed rock units and extract the geologic structures using satellite imagery data followed by both field and petrographic verification, saving time, efforts and cost. Results To achieve the target, both the measured spectral signature curves with Landsat-8 and Sentinel-2A data were used to develop and create the most enhanced Band Ratios and Principal Components for lithological discrimination and mapping which were (((Band7 + Band 4)/(Band 7), (Band 2)/(Band 2 + Band 5) and (Band 5) in RGB) and ((Band 9 + Band 11 + Band 12)/(Band 1), (Band 4 − Band 2) and (Band 11/Band 6) + (Band 6) in RGB)) with Principal Component Bands ((PC1, PC2 and PC3 in RGB) and (PC3, PC2 and PC1 in RGB)), respectively. Also, georeferenced Google Earth Pro, panchromatic band of Landsat-8 and ALOS PALSAR Digital Elevation Model images were used to extract the structural lineaments. Geologic, petrographic and field structural studies were emphasized the remote sensing results, indicating that the main rock types cropped out in Ras Abda area from the oldest to the youngest are older granitoids (quartz-diorites, tonalites and granodiorites), Dokhan volcanics (andesites, rhyodacites, rhyolites and their related tuffs), younger gabbros, younger granites (monzogranites, syenogranites and alkali-feldspar gran-ites), post-granite dykes and offshoots (acidic, microgranitic and basic types) and Phanerozoic sedimentary rocks. Also, the study emphasized that the E-W trend is the main structural trend controlling the investigated area followed by WNW-ESE and NE-SW directions. Conclusions The results of remote sensing achieved compliance with the geologic, petrographic and structural investigation through distinctly differentiating the different rocks and extracting the lineaments, indicating the accuracy of the remote sensing results and emphasizing their importance and effective role in producing a precise and highly accurate geologic map.


Background
The Arabian-Nubian Shield (ANS) is related to the northern segment of the Pan-African orogenic belt of East Africa [32], considering to be one of the best preserved and most widely exposures of Neoproterozoic juvenile continental crust on Earth [13,24].It is composed of island arc volcanosedimentary sequences and I-type magmatic rocks (plutonic and volcanic) that were derived from oceanic island arc volcanism and cratonized during the continental collision between the East and West Gondwana that closed the Mozambique Ocean and induced the East African Orogeny (EAO) around 750-630 Ma [4,35].After cratonization, the shield is injected by the eruption of K-rich volcanic rocks and emplacement of granitoid intrusions [18].Then, these rocks are exposed on the both flanks of the Red Sea in the western Arabia and northeastern Africa after uplift and erosion during Oligocene and younger times [27,35].
The investigated area constitutes a part of the northwestern ANS.It is composed of older granitoids, younger gabbros and younger granites which dissected by acidic, granitic and basic dykes of different attitudes [31].Awad et al. [5] classified the investigated granites into tonalites, granodiorites, monzogranites and alkali-feldspar granites.El-Mansi et al. [17] reported that the present Dokhan volcanics are related to fissure-type eruption and are classified as intermediate (basaltic andesites and andesites) and acidic volcanics (rhyolites and rhyodacites).
The study area is located at the extreme southern part of the northeastern desert (NED) of Egypt with a part at the central eastern desert (CED), nearby the Red Sea coast at about 10 km west Safaga City.It is bounded by latitudes 26° 39′ 30″-26° 46′ 00″ N and longitudes 33° 43′ 00″-33° 52′ 00″ E, covering an area of about 180 km 2 (Fig. 1a).It can be easily accessible from Safaga City on the Red Sea coast through Qena-Safaga asphaltic road, which passes through the southern part of the study area.It is dissected by several complex wadis with their tributaries-most of them are structurally controlled-e.g., Wadi (W.) Um Taghir striking E to NE, W. Abu Mayah (ENE to NE), W. Nuqara (SE), W. Ras Abda (ENE to E), W. Abu Hadeida (NE) and W. Barud El Abiad (E to ESE), while the highest peaks are represented by Gabal (G.) Nuqara (814 m above sea level), G. Um Taghir El Tahtani (599 m) and G. Ras Abda (459 m), occupying the eastern and southern parts (Fig. 1b).
Qena-Safaga road (W.Um Taghir) is considered the Egypt's largest fault shear zone separating two tectono-stratigraphic domains: NED and CED [15].The NED-northern and central parts of the study areais dominated by extensional structures with E-W and NE-SW main tectonic trends which were controlled by the evolution and retreat of the Cadomian Arc, while the CED-southern parts-is modified by transpressional and extensional structures with NW-SE and WNW-ESE main tectonic trends which kinematically akin to the Najd Orogeny [25].This is the main reason for selecting this area as a point of research.
Undoubtedly, the remotely sensed data application has brought new opportunities for the lithological identification and lineament extraction, particularly in inaccessible and rugged terrains, as in the case with the study area.In this respect, many studies used satellite imagery data for lithological discrimination and mineral exploration (e.g., [1,7,21,33]) and for lineament extraction and structural analysis (e.g., [11,14,30]) to create an accurate geologic map.The present paper is addressed to differentiate the exposed rock types in Ras Abda area using the remote sensing technique via integration between the rocks' spectral signature curves and remotely sensed data of Landsat-8 and Sentinel-2A.It is also concerned with the structural lineament extraction to elucidate the main trend controlling the study area.Obtained rock types and structural lineaments are geologically and petrographically verified on the field and under the polarizing microscope, respectively, in order to produce a precise geologic map of the study area.

Satellite imagery data 2.1.1 Landsat data
Landsat-8 OLI/TIRS C1 Level 1TP (Path 174/Row 42) is the data used, obtained from the home site of Earth Explorer (https:// earth explo rer.usgs.gov/), and acquired on December 14, 2020, at the day time according to the date of field trip (from 9 to 16 December 2020), with cloud cover equals about zero.Landsat-8 launched on February 11, 2013, carrying two sensors; the Operational Land Imager (OLI) and the Thermal Infrared Sensor (TIRS) to offer regular visible, infrared and thermal images of high quality, where the OLI measures in the Visible/Near Infrared (VNIR) and Short-Wave Infrared (SWIR) portions of the spectrum for nine spectral bands, and the TIRS measures land surface temperature in two thermal bands (Table 1).

Sentinel data
Sentinel Level 2A S2MSI2A is the data used, obtained from the home page of ESA Hub (https:// scihub.coper nicus.eu/ dhus/), and acquired on December 11, 2020, with cloud coverage assessment is about 0.1%.Sentinel-2 based on a constellation of two identical satellites in the same orbit: Sentinel-2A and Sentinel-2B.Each satellite carries an innovative wide swath high-resolution Multispectral Imager (MSI) which measures in the Visible/ Near Infrared (VNIR) and Short-Wave Infrared (SWIR) regions of the spectrum with thirteen spectral bands for providing a systematic optical imagery at high spatial resolution over land, vegetation and coastal areas.Sentinel-2 is the most advanced satellite with data freely available for long-range and high-frequency remote sensing applications, so it is one of the used materials in the current study (Table 1).The Landsat-8 and Sentinel-2A data geometrically corrected and georeferenced to Universal Traverse Mercator (UTM) Zone 36N map projection (units: meters) and to World Geodetic System 1984 (WGS84) datum and ellipsoid.

Laboratory spectral measurements
Understanding the interaction behavior between the Electromagnetic Radiation (EMR) and the targets considered as a major key factor in the processing and/or interpretation.Therefore, spectral signature is used as an effective method where it plots all the variations of reflected or emitted EMR of a material with respect to wavelengths (i.e., reflectance/emittance as a function of wavelength).Many authors used the relation between measured spectral signature curves with the remotely sensed imagery to discriminate and map the different rock types (e.g., [2,3,20,21]).
Spectral signature of ten suitable samples, representative of all the exposed rock types in the study area, was measured by an ASD TerraSpec Halo Mineral Identifier with the wavelength range of 0.35 µm to 2.5 µm.Averages of the spectral reflectance data are subjected to resampling algorithm to match wavelengths of Landsat-8 and Sentinel-2A bands.Then from the matched values, curves of the reflectance are plotted and carefully examined to detect the most sensitive bands, which are defined as a peak between two adjacent troughs or a trough between two adjacent peaks.Using sensitive bands, the optimal and appropriate band ratios and band math are generated and developed to accurately discriminate the studied rock types.

Atmospheric correction
Ideally, satellite imagery that is recorded by a remote sensing system considers the result of the reflectance of visible and infrared electromagnetic waves from the Earth's surface.These reflected signals comprise the actual reflectance from the surface and atmospheric noise resulted from effect of the atmosphere as well as errors which may be introduced by the sensor system itself.So that it is necessary to exclude these errors from data before image processing by executing some pre-processing corrections in order to get an accurate result.
Herein, the Fast Line-of-sight Atmospheric Analysis of Spectral Hypercubes (FLAASH) algorithm is applied to retrieve Landsat-8 image data from radiance to reflectance.This process is mainly based on some parameters, e.g., acquisition time, sun elevation, ground elevation, gains, offsets, solar irradiance, atmospheric model and aerosol model to determine Top-Of-Atmosphere reflectance (TOA), then calculate the Surface Reflectance (SR).ENVI 5.3 software package is used for pre-processing and processing of the data, and ArcMap 10.2 software is used for the final editing.Although band rationing does not need the SR values, the authors executed the atmospheric correction for two reasons: 1. To correlate the actual measured reflectance of represented rock samples with the SR values in the corrected images.2. For further research which will include some methods need to use the SR values-such as target detection-and integrate the results with subsurface geophysical data in order to develop a three-dimensional map of the investigated targets.

Pixel resampling
Sentinel-2A is pre-corrected atmospherically, but it includes thirteen spectral bands with different spatial resolution ranging from 60 to 10 m, so all bands with resolution of 20 and 60 m are spatially resampled to the smallest pixel-meter size (e.g., band 2 of 10 m) using ESA SNAP 8.0 software to preserve the spectral characteristics of the resampled bands.

Band ratios (BR)
BRs are approaches of image processing that are done by combining the pixels of two or more raster layers in mathematical combinations to enhance the spectral differences between bands and reduce the topographic illumination effects.Vincent [36] stated that band ratios are used to improve compositional information and exclude the other types such as terrain slope and grain size differences.This process is widely applied in geologic and mineral mapping (e.g., [10,12,16,19,23,26]).

Principal component analysis (PCA)
Principal component transform is a multivariate linear statistical procedure for removing redundant spectral information from multiband datasets in order to simplify these datasets from multidimensional to lower dimensions of uncorrelated linear combinations (eigenvector loadings) [22,29].PCA colored images show the maximum variance from several spectral bands with just compressed three primary display colors [36].
An eigenvector matrix displays the statistical correlation between the PCs and the input bands indicating the proportion that each input band contributes to each PC in what is known as weighting or factor loading.Eigenvalues indicate the proportion of original information that each PC retains.From eigenvalues, the percentage of the total variance for each PC can be calculated by computing the ratio of each eigenvalue to the sum of all of them.

Structural lineament extraction
Linear features may represent man-made/artificial features such as roads, railroads, tracks, aqueducts, or natural morphologic ones such as shear zones, faults, joints, dykes, veins, fold axial traces, ridgelines, truncation of outcrops, rift valleys and surface depressions in addition to topographic, vegetation and soil tonal changes alignment.Natural geologic linear features are often related to structural discontinuities of rocks and tectonic activity named structural lineaments.Digital Elevation Models (DEMs) and satellite images are extensively used for structural lineament extraction (e.g., [6,34]), where they are considered to be better tools to discriminate the lineaments and produce better information than conventional methods; furthermore, they make lineaments extraction easier, time saver and cheaper than them.In the current study, two methods of extracting lineaments are used:

Manual lineament extraction
This method involves manual digitizing of visually identified lineaments depending on human experience and ability, so it is easy to distinguish the kind of lineaments (natural or artificial).Georeferenced google earth image of maximum resolution and ArcMap 10.2 software are used to extract lineaments manually.

Automated lineament extraction Conversely,
this technique is automated lineament extraction using the mathematical function and specified algorithms of software cannot recognize the kind of lineaments.Panchromatic band of landsat-8 (15 m) and ALOS PALSAR DEM (12.5 m) is used.

Field and microscopic data
Field studies were carried out in G. Ras Abda area to check the occurrence and spatial distribution of the different rock types and the contacts between them, and to measure the different structural elements (faults, joints, dykes and veins).The collected samples for spectral signature were used again to petrographically study the rocks under the polarizing microscope in the NMA laboratories.

Fault data
The considerable area is highly dissected by numerous faults of different types, attitudes and extensions depending on the causative stress tensors and strength properties of the rock material.A number of 2122 field faults (fault plane with slicklines) of different conjugate systems were measured and statistically analyzed using Win-Tensor 2013 software [8].

Joint data
A number of 787 joints measured in all rock types are also statistically treated and plotted on a composite rose diagram in order to determine the main joint trends based on the frequency of their distribution in number proportions (N%).

Dyke and vein data
The attitudes of 224 dykes and veins were measured in the field and traced on the satellite image.They are statistically treated and graphically represented to illustrate their main trends.

Satellite imagery interpretation 3.1.1 Band ratios (BR)
Image processing is a method to perform some operations on a digital image in order to enhance the appearance of the imagery to assist in visual interpretation, analysis and extraction of some useful information from it.This image enhancement involves many techniques determined mainly based on the target of the study, the type of image format, the initial condition of the image and the composition of the image scene.In the present study, band ratio and principal component analysis are applied.
Both measured and resampled spectral signature curves are thoroughly studied to determine their reflectance behavior as well as the sensitive bands in order to create the optimum band ratios and combinations to enhance satellite images and accurately distinguish between the different rock types in the investigated area.Regarding to measured spectral signature curves of the represented samples (Fig. 2) and resampled Landsat-8 curves (Fig. 3), five bands (b4, b5, b6, b7 and b8) are selected as the most sensitive ones for the studied rock types.Two band ratios (Eqs. 1 and 2) were developed and created using the selected sensitive bands; the band ratio images show the best differentiation of the rock units in the study area.The band ratio images resulted by applying Eqs. 1 and 2 were stacked with b5 and displayed in RGB, respectively.The resulted image represented different wavelengths (2 and 4 of visible red and blue, 5 of NIR and 7 of SWIR); thus, it gave the highest variance discriminating among all the present rock types (Fig. 4).On the other hand, the measured spectral signature curves of the represented samples (Fig. 2) and resampled Sentinel-2A curves (Fig. 5) indicated four bands (b2, b4, b9 and b11) as the most sensitive ones.Accordingly, three band ratios are developed (Eqs.3, 4 and 5) and then stacked in false color composite image to clearly distinguish between all the investigated rock types (Fig. 6).

Principal component analysis (PCA)
Landsat-8 bands are subjected to PCA (eigenmatrix shown in Table 2), and the eigenvectors show that the highest variant and the lowest redundant pixel values are between PC1, PC2 and PC3 (Table 3).So that the three PCs are combined in RGB image to characterize all the exposed rock types in the considerable area (Fig. 7).Likewise, Sentinel-2A is subjected to PCA (eigenmatrix shown in Table 4), displaying PC1, PC2 and PC3 are the highest variant PCs (Table 5), so the colored image of PC3 in red, PC2 in green and PC1 in blue is the most appropriate image to discriminate between the examined rock types (Fig. 8).

Manual lineament extraction
A structural lineament density map which displays the distribution and concentration of the lineaments over the study area in order to highlight areas with the prevalence of structures was produced (Fig. 9a).Afterward, the extracted lineaments are subjected to geometric calculation to obtain polyline angles which are integrated in RockWorks 2016 to create rose diagrams based on both their number and cumulative length proportions showing the main trends of lineaments (Fig. 9b, c).The resulted rose diagrams revealed that the most common lineament trends are E-W, WNW-ESE and NE-SW in descending manner followed by NW-SE and ENE-WSW trends, while NNE-SSW, N-S and NNW-SSE represent the least common trends.

Automated lineament extraction
To make edge enhancement, panchromatic band of landsat-8 (15 m) is  11a) and plotted in rose diagrams (Fig. 11b, c).E-W direction represents the predominant lineament trend followed by WNW-ESE, NE-SW, NW-SE and ENE-WSW directions, while NNW-SSE, NNE-SSW and N-S represent the least abundant trends.

Field and microscopic verification 3.2.1 Rock-type discrimination
Ras Abda area is generally covered by the Neoproterozoic crystalline basement rocks, belonging to late-to postorogenic magmatism (Continental crust terrain) which is dated to the Late Cryogenian-Ediacaran periods (650-542 Ma) [28].The studied rocks are connected to igneous rocks of intrusive and extrusive types (older granitoids, The older granitoids represent the oldest and most predominant rock type, covering about 92 km 2 (51.1%) of the total area.They are commonly medium-to coarse-grained, light gray in color and exhibit cavernous weathering, bouldery appearance and well-developed exfoliation.Gneissic and migmatitic structures are presented, especially along the peripheries (Fig. 12a).They are intruded by the younger gabbros and younger granites with sharp intrusive contacts (Fig. 12b), receiving many offshoots from them.
The Dokhan volcanics are well-exposed along the eastern parts of the study area as a part of G. Nuqara, showing moderate to high rugged topography with sharp pointed peaks and steep slopes.They are intruded by the younger granites with sharp intrusive contact, receiving several offshoots and apophyses from them and are carrying by them as roof-pendants (Fig. 12c).The present volcanics display two members of volcanic flow sheets and minor pyroclastics; lower intermediate (andesites) and upper acidic (rhyodacites and rhyolites) and their related tuffs (Fig. 12d).Andesites are intercalated with acidic volcanics in the form of three elongated parallel belts trending NW-SE.Andesites are very fine-to finegrained, light gray to dark gray in color and include vesicles and amygdules filled with calcite, chlorite and quartz.Rhyodacites and rhyolites are very fine-to fine-grained, faint to reddish pink in color and overlain by andesites enclosing xenoliths from them.
The younger gabbros are situated along the northern peripheries of W. Abu Hadeida with limited distribution.They are hard and compact rocks, fine-to mediumgrained and dark gray in color, displaying cavernous weathering and bouldery appearance as well as spheroidal-and onion-shaped blocks.They intrude the surrounding older granitoids with sharp intrusive contact sending several offshoots into them (Fig. 12e) and carrying them as roof-pendants.
The younger granites are represented by an elongated curved belt extends NNE to NE from G. Um Taghir El Tahtani at the southern parts through G. Ras Abda in the middle to the northeastern limit of the study area.They are medium-to coarse-grained, varying in color from grayish pink, pink to reddish pink and sometimes display blocky appearance, spheroidal exfoliation and tuffoni weathering.They are classified into monzogranites, syenogranites and alkali-feldspar granites.Monzogranites are intruded by syenogranites which are intruded by alkali-feldspar granites with gradational contacts.Xenoliths of pre-existing rocks are recorded.
Post-granite dykes and offshoots involve acidic, microgranitic and basic types.The microgranites are cropped out along the two banks of W. Ras Abda at its middle part extending southward to W. Um Taghir as separated offshoots and elongated elliptical-shaped bodies with vertical walls, heterogeneous geometries and variable Fig. 5 Resampled Sentinel-2A spectral curves of the studied rock samples magnitude from few to hundred meters in length and from less than a meter up to tens of meters in width trending NNE to NE. Dessouky et al. [9] reported that these dykes show significant complex morphological feature as the first phenomenon to be recorded of this kind in the Egyptian Eastern Desert.They are fine-to medium-grained and show color varying from pink, dark red, reddish brown to brownish black according to their  alteration degrees.They are invaded the older granitoids (Fig. 12f ), and in turn they are traversed by basic dykes with no evidence of their intruding by acidic ones, so that they are dated as post-acidic dykes and pre-basic dykes in age.The basic dykes as well as aplites, pegmatites and quartz veins cut all the earlier mentioned rock types.Phanerozoic sedimentary rocks are unconformably capped all the studied basement rocks, particularly the Dokhan volcanics and younger granites at the northeastern parts, with very limited extension as mappable and unmappable low-lying hills and small sporadic masses of clastic, phosphate and carbonate rocks.
Petrographically, the older granitoids range in composition from quartz-diorites to granodiorites passing through tonalites.They are composed of various ratios of plagioclase (An 18 -An 42 ) (Fig. 13a), quartz, hornblende and biotite with minor alkali-feldspar (microcline).Tonalites differ from quartz-diorites in being lighter in color, richer in quartz content and contain less hornblende and more alkali-feldspar and biotite.On the other hand, granodiorites only differ from tonalites in their  high content of alkali-feldspar and somewhat high content of quartz.Accessory minerals are represented by sphene, zircon, apatite and opaques (Fig. 13b).Epidote, chlorite, sericite, kaolinite and titanite represent the secondary minerals.Andesites consist of plagioclase (An 24 -An 44 ) and hornblende with subordinate amount of biotite and quartz as essential minerals.They usually exhibit porphyritic texture and sometimes glomeroporphyritic (Fig. 13c) and amygdaloidal ones.Rhyodacites and rhyolites comprise phenocrysts of alkali-feldspar (sanidine and orthoclase) and quartz with little amount of plagioclase, biotite and opaques set in a microcrystalline groundmass that mainly composed of the same minerals and mostly corroded them.Spherulitic and porphyritic textures are prevalent in these volcanic rocks (Fig. 13d).The younger gabbros are predominantly composed of plagioclase (An 55 -An 70 ), olivine, pyroxene (augite) and hornblende (Fig. 13e).Apatite and opaques represent the accessory minerals.

Fault analysis
The statistical analyses of the measured faults (Fig. 14) revealed that the main fault

Joint analysis
The analysis treatment of the measured joints (Fig. 15) revealed that E-W, NNE-SSW and NE-SW are the main joint sets constituting 19.4%, 16.4% and 16% of the total number proportions of joints, respectively.They are followed by ENE-WSW and NNW-SSE sets, while WNW-ESE, N-S and NW-SE trends represent the minor ones.

Dyke and vein analysis
From the statistical analyses of the measured dykes and veins (Fig. 16), it can be noticed that most of dykes and veins follow E-W, WNW-ESE and ENE-WSW as master trends, followed by NE-SW and NW-SE directions.This is besides NNW-SSE, NNE-SSW and N-S as minor trends.
Based on remote sensing results, field observations and petrographic studies, a detailed geologic map is constructed (Fig. 17) in order to identify, classify and chronologically arrange the exposed rock types in the study area.Main structures are constructed on it.

Discussion
In the present work, a carful investigation of the measured spectral signature curves as well as the resampled one (which based on the wavelength range of both Landsat-8 and Sentinel-2A data characteristics) for the rock units in the study area, this led to determination of the most sensitive bands characterized the rock types presented in the study area.Accordingly, the chosen sensitive bands used for developed five mathematical formulas applied on the remotely sensed imagery for lithological discrimination.Generally, all resulted images show a very high accuracy.The developed band ratios were successfully differentiated among all the exposed rock types on the processed Landsat-8 and Sentinel-2A, while PCA did not show a clear differentiation between the older and younger granites on Sentinel-2A.Despite, it is still a good attempt for lithological mapping, where it was successful to discriminate all the exposed rock types on Landsat-8.
Field investigation was consistent with the remote sensing results for the occurrence of the different rock types and the relative contacts between them, constructing a detailed lithological map of the study area.Petrographic studies confirmed these results and were able to distinguish the three varieties of the older granitoids (quartz-diorites, tonalites and granodiorites) that field observation could not distinguish between them, because these rocks are intercalated with each other and grade into one another through gradational blurred contacts due to the slight variation in their mineralogical composition; therefore, it is usually difficult to detect exactly a mappable contact between the different varieties of the older granitoids and reliance was placed on the petrographic studies.
Although the intense structural deformation (W.Um Taghir) is considered the Egypt's largest fault shear zone separating two tectono-stratigraphic domains; NED and CED [15], applying different methods (manual and automated methods) to extract the geological lineaments on data with different spatial resolution (georeferenced Google Earth Pro images, panchromatic were consistent and precise determined the prevailing trend controlling study region.The statistical analyses of the structural field elements (faults, joints, dykes and veins) with the surface structural lineaments extracted from both-satellite imagery and ALOS PALSAR Digital Elevation Model-detected that the main structural trend controlling the study area is the E-W, followed by WNW-ESE and NE-SW directions, while NNW-SSE and N-S trends represent the least common.E-W trend is the master trend controlling the study area, which represents the prevailing tectonic trend in the NED of Egypt [25].
The results of remote sensing achieved compliance with the geologic investigation, detailed petrographic studies and structural investigation through distinctly differentiating the different rocks and extracting the structural lineaments for the geologic mapping.This indicates the accuracy of the remote sensing results and emphasizes their importance and effective role in the lithological identification and structural mapping and also emphasizes the importance of use multi-approach investigation (in the present study; satellite imagery data, field data and petrographic data) to obtain qualified results.
The results of the present study were consistent with previous studies in terms of the prevailing structural lineaments and the exposed rock units in the study area [5,17,25,31].However, integration of remote sensing technique, field and microscopic data proposed and applied in the current study was able to re-delineate the contacts among the different rock units, especially the contact between microgranites and older granitoids (Figs.4,6,7) renovating a new and more precise extension of high rugged microgranites.The study also clearly distinguished between Dokhan volcanics (e.g., andesites, rhyodacites and rhyolites) and of younger granites (e.g., monzogranites, syenogranites and alkali-feldspar granites) (Figs. 4, 6,

Conclusions
The following points can be concluded from the processing and interpretation of the remote sensing, geologic, petrographic and structural data used in this study:  to differentiate between all the exposed rock types in the study area.2. Also, PCA presented a good attempt in discriminating the studied rocks, although it could not distinguish among the granitic varieties on Sentinel-2A image.3. The main structural lineament trend controlling the considerable area is E-W followed by WNW-ESE direction, while the least common trends are represented by N-S and NNW-SSE.Moreover, the structural features are highly concentrated in the western parts of the study area.

Fig. 1 a
Fig. 1 a Location map of G. Ras Abda area, northeastern desert, Egypt.b 3D topographic model showing the main wadis and mountains in the study area

Fig. 2
Fig. 2 ASD TerraSpec Laboratory measured spectral curves of the studied rock samples

Fig. 3
Fig. 3 Resampled Landsat-8 spectral curves of the studied rock samples

Fig. 10
Fig. 10 Automated lineament extraction on panchromatic band of landsat-8 image, a lineament density map.b Rose diagram of lineament frequencies (N%).c Rose diagram of lineament lengths (L%)

Fig. 13
Fig. 13 Photomicrographs, a Plagioclase crystal showing composed lamellar twinning and zonation associated with hornblende and epidote (Ep) in tonalites, C.N. b Opaques (Op) surrounded by secondary titanite (Ti) in tonalites, C.N. c Phenocrysts of plagioclase embedded in groundmass of quartz and epidote (Ep) displaying glomeroporphyritic texture in porphyritic andesites, C.N. d Plagioclase and associated minerals exhibiting porphyritic and spherulitic textures in rhyolites, C.N. e Prismatic crystals of plagioclase enclosed within hornblende displaying pseudo-ophitic texture in younger gabbros, C.N. f Plagioclase and microcline perthite displaying lamellar and cross-hatched twinning, respectively, in syenogranites, C.N. g Anhedral crystal of riebeckite showing blue interference color in alkali-feldspar granites, C.N. h Iron oxides (IO) included euhedral crystals of zircon (Zr) and surrounded by perthite and quartz in alkali-feldspar granites, C.N. i Silicification of syenogranites with relics of microcline in microgranites, C.N

Fig. 14 Fig. 15 Fig. 16
Fig. 14 Geometry of the measured faults in the study area, a strike trend.b Dip direction.c Dip angle.d Rake angle

4 .
The geologic and petrographic studies classified and arranged the studied rock types from the oldest to the youngest as follows: older granitoids (quartzdiorites, tonalites and granodiorites), Dokhan volcanics (andesites, rhyodacites, rhyolites and their related tuffs), younger gabbros, younger granites (monzogranites, syenogranites and alkali-feldspar granites), post-granite dykes and offshoots (acidic, microgranitic and basic types) and Phanerozoic sedimentary rocks. 5. Also, the analysis of field structural elements (faults, joints, dykes and veins) revealed that E-W, WNW-ESE, ENE-WSW and NE-SW are the main structural trends, while N-S, NNW-SSE and NW-SE trends represent the minor ones.6.The results of remote sensing achieved compliance with the geologic, petrographic and structural investigation through distinctly differentiating the different rocks and extracting the lineaments, indicating the accuracy of the remote sensing results and emphasizing their importance and effective role in the lithological identification and structural mapping.

Table 1
Spectral characteristics and spatial resolutions of Sentinel-2 bands and Landsat-8

Table 3
PCA eigenvalues and total variance for Landsat-8 data Fig. 7 PCA color Landsat-8 bands composite (PC1, PC2 and PC3 in RGB) of the studied rock types

Table 5
PCA eigenvalues and total variance for Sentinel-2A data Fig. 8 PCA color Sentinel-2A bands composite (PC3, PC2 and PC1 in RGB) of the studied rock types