Table 4 Experimental results for wear of tool insert
From: Turning parameters optimization for TC21 Ti-alloy using Taguchi technique
Experimental serial number | Cutting speed V (m/min) | Feed rate f (mm/rev) | Cutting depth a (mm) | Tool wear Ymax (µm)Mean |
|---|---|---|---|---|
1 | 80 | 0.05 | 0.2 | 221.697 |
2 | 80 | 0.10 | 0.4 | 274.896 |
3 | 80 | 0.15 | 0.6 | 268.570 |
4 | 100 | 0.05 | 0.4 | 229.129 |
5 | 100 | 0.10 | 0.6 | 226.584 |
6 | 100 | 0.15 | 0.2 | 187.770 |
7 | 120 | 0.05 | 0.6 | 263.200 |
8 | 120 | 0.10 | 0.2 | 235.300 |
9 | 120 | 0.15 | 0.4 | 257.071 |